But the characteristic conception of fully automatic compacts with zoom lens and optical zoom finder has already been taken over as one of the most popular digital camera layouts of today. Concurrently to their APS SLR film cameras, some manufacturers released lenses intended for use on APS film cameras – such as the Canon EF mm – which had a wider field of view to account for the relative-tomm crop factor. This information exchange was most commonly used for print aspect ratio, but could also be used to record the date and time that the photograph was taken, store a caption, and record exposure data such as shutter speed and aperture setting. Your name or email address: The processed indicator on the cartridge means the film inside has been developed into negative images a. This ID was designed to be an additional convenience both for the photoprocessor who can easily match each strip of processed film with its cartridge, and each cartridge to a particular customer’s order and for the consumer, who can easily locate the correct cartridge if reprints are desired. The additional mechanical marker in the film cartridge shows when a film is full.

But there were different size variants prefered by different camera makers: By using this site, you agree to the Terms of Use and Privacy Policy. Thus the early digital compacts with viewfinder are already a classic type of camera, derived from the APS compacts. Some APS-film-viewers offer the possibility of changing the information on this magnetic storage, for example to switch the print format, or to add information for a slideshow on that viewing device. Share This Page Tweet. The magnetic data storage on the APS film is made possible by a transparent magnetic coating of the film’s back. This article is about the film format. Thus a photographer can switch from the color film he actually uses to a black and white film for some exposures, and vice versa, until both films are full.

Unlike film, processed developed APS film is stored in the original cartridge.

The film cartridges of the APS system differ aevantix that of any other cartridged film rolls. APS cameras found most of their success among the consumer point and shoot camera market. Nowadays only film speedsand ASA are available. It’s also used for removing a film from a camera for putting it back into it later.


I promised a friend I would scan their film with my Polaroid Sprintscan, and make an enlargement. APS was mainly used for point and shoot amateur cameras, although some SLR systems were also created: It’s very easy -You don’t take the cartridge apart – The film gate flap will move to open easily – the pivot point for the flap is fairly obvious. APS film was much better suited for use in compact ‘point and shoot’ cameras for the general public than for professional use.

The film surface has a transparent magnetic coating, and the camera uses this information exchange IX system for recording information about each exposure.

By clicking “Post Your Answer”, you acknowledge that you have read our updated terms of serviceprivacy policy and cookie policyand that your continued use of the website is subject to these policies. If you scan or print them yourself, the results will be better than any ever printed from any in-shop mini-lab. Post as a guest Name. The Advanced Photo System was an attempt of a major upgrade of photographic technology for amateurs, but was soon overtaken by the popularity of digital photography.

Once cut out many labs will not deal with the negatives anymore.

How to open “Advantix” film cartridge | Photography Forums

Every single image on the developed film has this format, the print format is just information written by the camera onto magnetic storage on the film – which is used by the printing equipment to crop the picture appropriately. Optical IX was employed on less expensive cameras and disposable cameras, and employed a light source to expose a small section of the film, outside of the image negative area.

From Wikipedia, the free encyclopedia. APS film is typically processed by using a small machine to transfer the exposed APS film from the original cartridge to a reloadable one, then re-attached to the original cartridge and rewound using another machine after processing. The H format is the original format. But soon, 35mm films were sold with the same resolution.


If need be, I will mask cartrivge the carrier to hold the smaller film. Not sure where to post this. This process only needs to be done once. Donald Ingram’s notes on opening an Advantix cartridge are very helpful. This method was limited to determining the advntix aspect ratio of the finished print. If it is another’s APS cartridge; they may or may not want the frames cut out. This ID was designed to be an additional convenience both for the photoprocessor who can easily match each strip of processed film with its cartridge, and each cartridge to a particular customer’s order and for the consumer, who can easily locate the correct cartridge if reprints are desired.

Nevertheless the cute cameras had a lot of fans. Minolta Vectis GX-2 [9]. Scanning on a nikon or hand printing.

How to open “Advantix” film cartridge

Opened the cassettes today and filed the film with all my other negative material. The exposure numbers are stored twice, once as magnetic data, and another time enlighted on the film which has just one perforation with two holes per image. These developments, combined with the fact that auto-loading 35mm cameras could be made almost as compact, as convenient, and as inexpensive as APS-format cameras, prevented APS from attaining greater popularity. Please pardon my ignorance, but how do I open the damn cartridge to get at the exposed film?

The film is then wound out advantic back in again by turning the center core – I use the end cap of a BIC pen for both jobs.

Fujifilm nexia Q1 [3]. Photo of the Week. Views Read View source View history.